- Wired 10/100 Ethernet network interface
- RJ-45 form factor
- Industrial operating temp.
- Supports Digi Embedded Linux and NET+OS
Description
Digi Connect ME® 9210: Intelligent Ethernet Connectivity in RJ-45 Form Factor
The Digi Connect ME 9210 is an ultra-compact embedded system-on-module (SoM) with 10/100 Ethernet support based on Digi’s new and powerful 32-bit NS9210 processor (ARM9). The module allows customers to implement the next generation of leading network-enabled products and maintains full form factor and pin-compatibility with the existing Digi Connect ME family. Digi’s own NET+ARM processor technology also delivers the true long-term availability that is a key requirement for embedded applications.
The Digi Connect ME 9210 can provide future application-specific interface options (CAN, 1-Wire, UART,etc.) through its unique on-chip Flexible Interface Module (FIM), while still keeping the main serial port or other peripheral interfaces available. The module is also suitable for more advanced main application processor applications with its support of up to ten shared GPIOs, external IRQs and an extended set of peripheral interface options such as I2C and SPI. The system-on-module also offers an industrial operating temperature.
Digi JumpStart Kits® are cost-effective, easy-to-use development solutions that minimize product design risks and shorten time-to-market. They leverage the reliability and flexibility of the royalty-free ThreadX-based NET+OS® platform, or the readily available library of software and community support of the Linux® environment.
Specifications
| Digi Connect ME® 9210 | |
|---|---|
| Processor | 32-Bit Digi NS9210 processor ARM926EJ-S 75 MHz 4k I/D Cache |
| RAM | 2/4 MB NOR flash 8 MB SDRAM |
| Flexible Interface Modules (FIMs) | 300 MHz DRPIC165X CPU 2k program/192 bytes data RAM |
| Power Management Modes | On-the-fly clock scaling Low-power sleep modes Configurable scaling/wake-up events (EIRQ, UART, Ethernet, etc.) |
| Pins/Form Factor | RJ-45 connector style with 20-pin micro pin header (Samtec FTS-110-01-F-DV-TR) |
| High-Speed TTL Serial Interface | Full signal support (TXD, RXD, RTS, CTS, DTR, DSR and DCD) Hardware/Software flow control |
| GPIO | 10 shared Up to 3 external IRQ options |
| SPI | Master data rate up to 16.7 Mbps Slave data rate up to 7.5 Mbps |
| I2C | v1.0 bus interface 7-bit and 10-bit address modes |
| Flexible Interface Support (FIM) | UART, 1-Wire, CAN |
| JTAG Interface | Available on development modules only (P/N DC-ME-Y401-JT, DC-ME-Y402-[LX]-JT) |
| Wave-Solderable Design | No clean flux process |
| Dimensions | 36.7 mm x 19.05 mm x 18.67 mm |
| Netzwerk Interface – Wired | Physical Layer: 10/100Base-T Data rate: 10/100MB/s (auto-sensing) Mode: Full- or half-duplex (auto-sensing) Connector: RJ-45 w/ magnetics PoE Power Pass-Through: 802.3af compliant (Mid- and End-span) |
| Operating Temperature | -40° C to +80° C (-40° F to +176° F) |
| Storage Temperature | -50° C to +125° C (-58° F to +257° F) |
| Humidity | 5% to 90% (non-condensing) |
| Power Requirements (3.3VDC) | Maximum: 450 mA (1.485 W) Typical: 346 mA (1.14 W), UART and Ethernet activated Idle: 186 mA (613 mW) / 16 clock scaling, Ethernet activated Sleep: 34 mA (113 mW) Wake-up on EIRQ, Ethernet PHY off |
| Regulatory Approvals | FCC Part 15 Class B, EN 55022 Class B EN 61000-3-2 and EN 61000-3-3 ICES-003 Class B, VCCI Class II, AS 3548 FCC Part 15 Sub C Section 15.247 IC RSS-210 Issue 5 Section 6.2.2(o) EN 300 328, EN 301 489-17 UL 60950-1, EN 60950 (EU) CSA C22.2, No. 60950 EN 55024 |
| Product Warranty | 3 years |
Documents
| Digi Connect ME 9210 Datasheet | |
| Digi ConnectCore Embedded Feature – Product Comparison Guide (SOMs & SBCs) |
Part Numbers & Accessories
| Digi JumpStart Kits | |
|---|---|
| DC-ME-9210-LX | Digi Connect ME 9210 Digi JumpStart Kit for Digi Embedded Linux, w/Eclipse-based Digi ESP IDE, LiveDVD, and installation and setup support package |
| DC-ME-9210-NET | Digi Connect ME 9210 Digi JumpStart Kit for NET+OS 7 w/Eclipse-based Digi ESP IDE, USB debugger, installation and setup support package |
| Modules for Digi Plug-and-Play Firmware | |
|---|---|
| DC-ME-Y402-S-UPW | Digi Connect ME 9210 w/4 MB Flash, 8 MB RAM, Plug-and-Play Firmware, SB-327 compliant |
| Modules for Linux | |
|---|---|
| DC-ME-Y402-LX | Digi Connect ME 9210 w/4 MB Flash, 8 MB RAM (single-unit pack) |
| DC-ME-Y413-LX | Digi Connect ME 9210 w/16MB SDRAM, 8 MB Flash, for Digi Embedded Linux, Single Pack |
| Modules for NET+OS | |
|---|---|
| DC-ME-Y401-C | Digi Connect ME 9210 w/2 MB Flash, 8 MB RAM (single-unit pack) |
| DC-ME-Y402-C | Digi Connect ME 9210 w/4 MB Flash, 8 MB RAM (single-unit pack) |