- Single-board-computer platform
- NXP i.MX6UL-2 processor
- i.MX 6UltraLite
- Dual-band 802.11a/b/g/n/ac 2×2 and Bluetooth® 5 connectivity
- Complete Yocto Project® Linux® BSP with source code
FEATURES
Description
Digi ConnectCore® 6UL SBC Pro – Single Board Computer in standard form factor with complete design flexibility
Digi ConnectCore 6UL SBC Pro delivers the ultimate connected off-the-shelf NXP i.MX6UL single board computer with complete capabilities and unparalleled design flexibility.
Its unique pre-certified wireless connectivity options offer 802.11a/b/g/n/ac Wi-Fi and Bluetooth® 5, including Bluetooth Low Energy. Out-of-box cellular integration options using the pre-certified Digi XBee® Cellular modem or third party PCI Express Mini Card modem allows you to integrate cellular connectivity without the usual cost and complexity.
Digi’s complete Linux support includes the built-in Digi TrustFence® device security framework with support for secure boot, encrypted filesystems, protected ports, and more.
Build Secure Connected Embedded Devices Powered By Digi TrustFence
Device security is a critical design aspect for every connected device. The ConnectCore 6UL combines a secure module platform with a complete embedded device security software framework. Build products today that provide you and your customers with a secure product platform now and in the future.
- Managed device security software framework
- U-Boot and Linux platform integration
- Transparent and future-proof architecture
- Zero implementation effort
i.MX 6UltraLite – The most power efficient, lowest cost and smallest industrial i.MX6 family processor
Built on the NXP i.MX6UL application processor, the ConnectCore 6UL is the intelligent communication engine for today’s secure connected devices in industrial applications. It seamlessly integrates dual-Ethernet and pre-certified dual-band Wi-Fi (802.11a/b/g/n/ac) with Bluetooth 4.2 connectivity.
Specifications
Digi ConnectCore® 6UL SBC Pro | |
---|---|
Application Processor | NXP i.MX6UL-2, ARM® Cortex®-A7 @ 528 MHz, 128 KB L2 cache, with NEON™ MPE (Media Processor Engine) co-processor |
Memory | 256 MB NAND flash, 256 MB DDR3 (CC-SBP-WMX-JN58); 1 GB NAND flash, 1 GB DDR (CC-SBP-WMX-JN7A) |
Displays | 24-bit Parallel RGB (40-pin header), and 18-bit LVDS (20-pin header) |
Camera | 8-bit Parallel CSI (20-pin header) |
Audio | 3.5 mm headphone jack, 6-pin header (speaker), 8-pin header (line-in, microphone, line-out) |
UART/Console | 14-pin header (1 x two-wire, 2 x four-wire, one shared with XBee socket), 3-pin header (console) |
GPIO | 14-pin header (8 x GPIO, 1 x touch) |
Ethernet | 2 x RJ-45 (10/100 Mbit) |
Wi-Fi | Dual-band 802.11a/b/g/n/ac 1×1 (MCS 0-9) |
Bluetooth | Bluetooth 5, with Bluetooth Low Energy support |
Antenna Connectors | On-module U.FL or on-board MMCX antenna connector for Wi-Fi and Bluetooth, external NFC antenna option |
NFC | Energy-harvesting NXP NTAG, field detection trigger, ISO 14443A and NFC Forum Type 2 Tag compliant |
Digi XBee RF | Standard Digi XBee socket |
USB | 2 x USB Host (dual Type-A), 1 x USB Host (6-pin header ), 1 x USB OTG (micro-USB) |
PCIe Mini Card | Half-size and full-size card support, with on-board Micro SIM slot support |
Other Connectivity | 1 x I2C (6-pin header), 1 x SPI (8-pin header), 2 x CAN (6-pin header) |
External Storage | microSD , on-board 4 GB eMMC flash for data storage |
RF Control | 14-pin header (Wi-Fi Enable/Disable, Bluetooth Enable/Disable, Wakeup, PCM, LTE Control, GPS Co-Existence) |
Debug | Tag-Connect for JTAG and SWD |
Buttons | Power, Reset, User, Boot Select (NAND/microSD), RF (Wi-Fi Enable, Bluetooth Enable), Antenna Select (U.FL on-module/MMCX on-board) |
LEDs | Power, 3 x User |
Power | 3.3 V out (2-pin header), 5 V out (2-pin header), battery (2-pin header) |
Supply Voltage | 5 V @ 3.2 A (typical, depending on use case); see ConnectCore 6UL module product brief for module-only power consumption guidance |
Power Connectors | Locking barrel connector (2 mm), or dedicated power connector (3-pin header) |
Operating Temperature | -40° ~ 85° C (-40° ~ 185° F) |
Storage Temperature | -50° ~ 125° C (-58° ~ 257° F) |
Humiditiy | 5 ~ 90%; non-condensing |
Radio Approvals | US, Canada, EU, Japan, Australia/New Zealand |
Emissions/Immuniy/Safety | FCC Part 15 Class B, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, ICES-003 Class B, VCCI Class II, AS 3548, FCC Part 15 Subpart C Section 15.247, IC (Industry Canada), RSS-210 Issue 5 Section 6.2.2(o), EN 300 328, EN 301 489-17, EN 55024, EN 301 489-3, Safety (UL/UL equivalent) |
Design Verification | Temperature: IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-78; Vibration/Shock: IEC 60068-2-6, IEC 60068-2-64, IEC 60068-2-27, HALT |
Dimensions | 100 mm x 72 mm |
Product Warranty | 1 year |
Documents
Digi ConnectCore 6UL SBC Pro- Datasheet | |
Digi ConnectCore Embedded Feature – Product Comparison Guide (SOMs & SBCs) |
Part Numbers & Accessories
Models | |
---|---|
CC-SBP-WMX-JN58 | Digi ConnectCore® 6UL SBC Pro |
CC-SBP-WMX-JN7A | Digi ConnectCore® 6UL SBC, Pro 1 GB Flash, 1GB RAM |
Development Kit | |
---|---|
CC-WMX6UL-KIT | Digi ConnectCore® 6UL Development Kit |