BRESSNER Technology GmbH - Logo

Empowered by Hardware Solutions

Digi ConnectCore® 9P 9215 series

Compact system-on-module with 32-bit NS9215 ARM processor

FEATURES

  • System-on-module platform
  • Compact 150MHz ARM9 module
  • Secure Ethernet networking
  • Common family footprint for wired and wireless modules
SKU: 26698

Description

Digi ConnectCore® 9P 9215 Modul – Highly integrated, network-enabled core module

The Digi ConnectCore 9P 9215 module delivers a powerful, secure and compact network-enabled 150 MHz NS9215 processor solution with ARM9 core, a rich set of peripherals and unique interface flexibility. With leading features like an on-chip AES encryption engine, two independent and fully programmable flexible interface modules and Digi’s patented dynamic power management options, it is the ideal solution for today’s networked embedded applications. Digi’s own NET+ARM processor technology also delivers the true long-term availability that is a key requirement for embedded applications.

Digi ConnectCore 9P 9215 modules feature the design, development and administrative advantages offered by Digi Remote Manager. This secure, highly-scalable platform seamlessly ties enterprise applications and remote devices together.

Specifications

Product: Digi ConnectCore® 9P 9215 series
Processor 32-Bit NS9215 processor
ARM926EJ-S
4k I-Cache/4k D-Cache
150 MHz
Memory Up to 16 MB NOR flash
Up to 32 MB SDRAM
Additional Population Options RJ-45 Ethernet connector
2 / 4 / 8 / 16 MB NOR flash
8 / 16 / 32 MB SDRAM
Flexible Interface Modules (FIMs) 2 x 300 MHz DRPIC165X CPUs with 2k program/192 bytes data RAM
Power Management Modes On-the-fly clock scaling; Low-power sleep modes; Configurable scaling/wake-up events (RTC, ADC, EIRQ, UART, etc.)
Pins/Form Factor Small-footprint module with 2 x 80-pin board-to-board connectors
UART Up to 4 high-speed UARTs; Maximum data rate 1.8432 Mbps
GPIO Up to 64 GPIOs; 2 external IRQs
SPI Master data rate 33.3 Mbps; Slave data rate 7.5 Mbps
I2C v1.0 bus interface; 7-bit and 10-bit address modes
External Memory Bus 17-bit address and 16-bit data bus with 2 external chip select
ADC 12-bit/8-channel; External reference
Timers/PWM Up to ten 16-/32-bit timers/counters
Modes: internal timer with external terminal count option, external gated timer, event counter
Up to 5 PWM functions
LEDs 2 (general purpose)
Real-Time Clock With 64 bytes of NVRAM and external battery backup
Dimensions 50 x 50 x 6.1mm (population option w/o RJ-45)
Ethernet IEEE 802.3
10/100Base-T
10/100 Mbps (auto-sensing)
Full or half duplex (auto-sensing)
Wi-Fi IEEE 802.11a/b/g
WEP/WPA/WPA2/802.11i
2.4/5 GHz
Up to 54 Mbps with automatic rate fallback
Modulation: DBPSK (1 Mbps), DQPSK (2 Mbps), CCK (11, 5.5 Mbps), BPSK (6, 9 Mbps),
QPSK (12,18 Mbps), 16-QAM (24, 36 Mbps), 64-QAM (48, 54 Mbps)
Typical Transmit Power 18 dBm @ 1 Mbps (802.11b)
12 dBm @ 54 Mbps (802.11g)
Receive Sensitivity -72 dBm @ 54 Mbps (802.11a/g)
Connectors 2 x U.FL
Power Requirements Maximum: 554 mA (1.83 W)
Typical: 443 mA (1.46 W); UART B/D and Ethernet on
Idle: 208 mA (686 mW); 16 clock scaling, Ethernet on
Sleep: 46 mA (151 mW); EIRQ wake-up, Ethernet PHY off
Betriebstemperatur -40° ~ 85° C (-40° ~ 185° F)
Lagertemperatur -40° ~ 85° C (-40° ~ 185° F)
Luftfeuchtigkeit 5 ~ 95%; non-condensing
Approvals FCC Part 15 Class B, EN 55022 Class B
EN 61000-3-2 and EN 61000-3-3
ICES-003 Class B, VCCI Class II, AS 3548
FCC Part 15 Sub C Section 15.247
IC RSS-210 Issue 5 Section 6.2.2(o)
EN 300 328, EN 301 489-17
UL 60950-1, EN 60950 (EU)
CSA C22.2, Nr. 60950
EN 55024
Japan (Regulatory approvals pending)
Product Warranty 3 years

Documents

Digi ConnectCore 9P 9215 – Datasheet
Digi ConnectCore Embedded Feature – Product Comparison (SOMs & SBCs)

Part Numbers & Accessories

Modules for Linux
CC-9P-V513-LX ConnectCore 9P 9215, 8 MB flash, 16 MB SDRAM, no on-module RJ
CC-9P-V524-LX ConnectCore 9P 9215, 16 MB flash, 32 MB SDRAM, no on-module RJ


Modules for NET+OS
CC-9P-V502-C ConnectCore 9P 9215 module with 4 MB Flash, 8 MB SDRAM, no on-module RJ-45

Go to Top